How to Use a Beard Trimmer? How To Trim a Beard With Clippers? How To Trim a Beard With Scissors?
Set the desired cutting length on the beard trimmer. If you are not sure about your future beard length, start with a larger setting. So you can check your shear result first and still have scope for shortening.
When cutting, guide the device against the grain, i.e. against the direction of growth of your whiskers. Do this with slow movements.
To trim on the upper lip whiskers, you can see in addition to a beard trimmer access (advertising). This means that the whiskers do not fall over the lips – a charming effect when eating and drinking.
Clean your beard trimmer after using it. A small brush is usually included with the device. Otherwise, an old toothbrush will do the same.
Some devices can even be cleaned under running water. Be sure to follow the device instructions!
How To Style a Beard? How to Style Your Beard? How To Style Beard?
In our opinion, the perfect beard styling includes taking care of your beard and that – let’s call it – getting it into shape, i.e. what you should do every day of your beard life in the morning after the shower in front of the mirror. Various beard care products will help you keep your beard groomed and styled (almost) all day long.
Depending on your beard style, you don’t always need everything to keep your beard under control with beard wax. For example, it doesn’t make sense. That’s not what it is intended for. Plus, you’re likely to have a hard time combing your moustache with a beard comb. But one by one, listen to our suggestions for your beard styling and find your perfect beard shape.
- Trim any protruding whiskers with scissors
- Give your beard scent and shine with beard oil
- Style your moustache with a soft moustache wax
- Or even twist it with a firm moustache
- Tame your beard with beard pomade
- Shape your beard with a beard brush
How To Trim a Beard with Clippers?
How To Make Beard Balm?
Beard balm is the neat middle ground between beard oil and beard pomade, as it combines the favourable properties of both beard care products. Beard balm, also called Beard Balm, is used to care for your beard richly and give it a slight hold. It has taken over the nourishing properties of beard oil, thanks to similar ingredients. Because the beard balm also contains various carrier oils that soothe and nourish your skin, give your beard a silky shine and make it softer. The fragrant essential oils are also included in the beard balm.
The solid ingredients, i.e. the different waxes, are taken over from the beard pomade. But they are kept lower in percentage terms. Therefore, a beard balm is softer, which is why it gives your beard hold, but only slightly. Therefore – we think – it is more of an alternative to beard oil than to beard pomade. As already mentioned, the ingredients beeswax and wool wax and shea butter and cocoa butter are responsible for the hold. An almond-sized amount of beard balm is sufficient. You rub it well between your hands and massage it gently and extensively into your beard. Then you go over it again briefly with a brush or comb. Beard balm is the neat middle ground between beard oil and beard pomade, as it combines the favourable properties of both beard care products. Beard balm, also called Beard Balm, is used to care for your beard richly and give it a slight hold. It has taken over the nourishing properties of beard oil, thanks to similar ingredients. Because the beard balm also contains various carrier oils that soothe and nourish your skin, give your beard a silky shine and make it softer. The fragrant essential oils are also included in the beard balm.
The solid ingredients, i.e. the different waxes, are taken over from the beard pomade. But they are kept lower in percentage terms. Therefore, a beard balm is softer, which is why it gives your beard hold, but only slightly. Therefore – we think – it is more of an alternative to beard oil than to beard pomade. As already mentioned, the ingredients beeswax and wool wax and shea butter and cocoa butter are responsible for the hold. An almond-sized amount of beard balm is sufficient. You rub it well between your hands and massage it gently and extensively into your beard. Then you go over it again briefly with a brush or comb.
How to Brush Your Beard?
Nobody likes that. The solution is a beard comb with large, relatively far apart prongs that you can use to loosen it up again. Carefully comb the whiskers on the cheeks first with the downward stitch, the hair on the neck and the chin forward against the grain. Look in the mirror; it looks funny now. Comb the hair backwards, first on the chin and then on the neck, with feeling.
A moustache comb has proven itself for your moustache. Strictly speaking, that’s the big beard comb, just cute. This “size” has the advantage that you can comb under your nose with it without any problems, even if you have huge teeth.
How to Grow a Long Beard?
Commit to growing your beard. It will work with the new beard with our tips, but the first few weeks will not be accessible if you grow your beard!
Your beard needs a lot of love and affection. If you want to grow your long beard, then organise long beard care set for your long beard’s care, then your beard will grow faster – just for fun, it will not grow fast, but it will not itch, but look good. While doing it!
It’s important to realise that a beard takes time to look good and look neat, especially in the early stages. Comments from friends or acquaintances could (will) frustrate and discourage you. But at some point, a beard is very satisfying and worth the effort. In the beginning, every beard doesn’t look too good!
You have to take care of the beard every day, skin and hair. The proper care is to decide whether you go through the growth process, and the beard looks thicker and more well-groomed!
The success of growing a beard depends largely on your commitment and, of course, on your genetic makeup. Some people are blessed with a sprouting beard that turns into a full beard in a few weeks (4-6 weeks), and others take many hard months to accomplish the same goal.
Unfortunately, there are not many ways to change something in the genome, but if you approach the matter with a lot of commitment, you can achieve a lot. If you don’t like the beard anymore, you can shave it off again in a few minutes.
How to make a fake beard?
How To Grow a Beard Asian?
How to Brush Beard?
Brush and comb your beard regularly! Not just after washing your beard but also in between. If you have a full beard, use a brush with stiffer bristles, for example, wild boar bristles or bristles made from vegetable Tampico fibre. When combing, they absorb sebum and distribute it evenly in the long beard hair. Proceed gently and be careful when brushing that nothing scratches or tears.
There are special moustache combs for the moustache, with which the moustache can be easily combed and shaped.
How To Trim Short Beard? How To Trim My Beard? How Do I Trim My beard? How to Trim a Curly Beard?
A short beard should be trimmed regularly and kept in shape. We explain step by step how this works best:
Wash the beard: Before it is trimmed, the beard should be washed with beard shampoo. Then let it dry, comb and off you go.
Adjusting the cutting length: Before you can trim the beard, you should adjust the trimmer to the desired cutting length. It is best first to adjust it to the greatest length and cut again if necessary.
Trimming a beard: The best way to start trimming a beard is on the cheeks. These are trimmed in the direction of growth. Short sections like the sideburns are best cut against the advice of growth. However, if the skin reacts sensitively, you can also try out here whether it works better in the direction of growth.
Cut the schnauzer: It is best not to cut too much length here and also the first test the largest setting and trim again if necessary. You can also do a great job with beard scissors: Comb the beard hair down and cut all hair straight off just before the upper lip.
Draw contours: When trimming the beard contours, the cheek and neck areas are critical. The best way to do this is to use a gel or shaving oil and proceed with the wet razor if the electric razor does not have a contour attachment.
Comb and care for your beard: At the end, comb or brush again and ideally work on the beard with beard oil or another care product.
How To Trim a Mustache With a Beard? How To Trim Short Beard?
As far as the transition of the contours is concerned, there are three different options:
Here, the complex transition with the blade: You only use the wet razor or razor and thus make a clear transition from the skin to the beard. This is particularly useful with short beards, such as the 3-day beard, and it also looks good with well-groomed longer beard hairstyles.
The smooth transition with the trimmer: Sometimes, it is enough for a smooth transition with the trimmer’s smallest step. This is particularly useful with longer beards and when you are under time pressure. However, this species looks a bit more rustic due to the short hair that remains.
A mixture: Here, you can first shave the contours with the trimmer and then work your way up from the outside with the wet razor until you like the result.
What we recommend: Give it a try. First, shave the contours with the trimmer and then slowly remove the trimmed hair with the wet razor. You will quickly see which type of transition suits you.
There are two options on the cheek: Either you shave a smooth line or a slightly curved line. In our example, the contour is a little curved. This looks a little less rustic than the vertical line.
To shave the edge of your cheek, turn your head so that you can see your cheek well in the mirror. Then you start to remove the hair with precise strokes. It is best to work closer and closer to the beard from the outside and not immediately set the contour’s final edge.
By the way: there are now so-called “beard templates” that are supposed to help draw lines more cleanly. As a beginner, you can, of course, try this out, although we advise you to practice a little. In the end, a beard is also something natural or masculine and does not always have to be perfectly cut to the millimetre. Also, faces are very different, which is why the stencils are not suitable for everyone.
How To Trim Neck Beard? How To Trim Beard Neckline?
Before you start trimming your neckbeard, you need to learn to recognise it. This is an invisible line between the ears that passes just above your Adam’s apple. Then go in front of a mirror, tilt your head back slightly and place two fingers just above Adam’s apple. From there passes the invisible line under which you should always cut any hair. No matter what the length of your beard is – long or short, there must always be a clear line separating your beard from the lower neck.
Before we get started, we have a few small tips. Remember to be careful not to cut the hair on your neck too high or too low. It would help if you then waited for some time to fix it. And remember that shaving after or during a shower can help. This is because hot water dilates the pores and makes shaving easier.
Now it’s time to shave the beard below the neckline. Use King C. Gillette’s Neck Razor: Start from the middle to the ear, but pay attention to the jawline. Go back to the middle and move on to the other half. With a little practice, you will be able to handle this step accurately and quickly. If you make a mistake in defining the line on the neck, let the beard grow long enough and define a new one. The waiting time is subjective. It could be a couple of days or a week.
How To Shave Neck Beard? How to Shave For a Beard?
Even if the area on the neck or larynx is not always clearly visible, it is one of the most frequently incorrectly shaved areas. It is essential here that the contours are not set too high up, especially on the side of the neck, which is clearly more visible than the larynx, a contour that is set too high looks strange.
To shave this area, lift your head straight up so that you can clearly see the first side of your lower neck in the mirror. As with the cheek, you should work your way closer and closer to the beard from the outside so that you don’t shave away too much. Switch sides now and then so you can get an idea of what the result will look like. The first few times, the procedure will take a little longer, but once you’ve memorized the correct proportions, it will be quicker and easier.
How to Trim a Full Beard?
Even a full beard needs to be trimmed from time to time with a trimmer or some other device. First of all, the beard should be washed with an appropriate shampoo to be free of care and styling products. It then continues in the dry state. Adjust the trimmer: How much of the beard should be cut off, and how long should it be after cutting? Then vary the length of the trimmer accordingly. The big difference to the three-day beard is that the full beard is shaved with the direction of growth. First, trim the large areas such as the goatee and whiskers on the cheeks, then walk along with the sideburns and cut and trim the moustache at the very end.
How To Trim Your Beard With a Trimmer? How Should I Trim My Beard?
- Comb your beard to loosen any knots and whiskers.
- Shape your beard into your desired shape to trim it.
- Irregularities in the beard can now be easily cut out.
- Trim your beard. First, start with the cutlets raised against the growth, then the moustache.
- Define your cheek area by adapting the cutlets to the moustache.
- Trim the jaw and neck area to your desired shape.
- The beard is done!
How to Soften Beard Stubble?
Wash your beard every morning
Before going to work, going to university or generally at the beginning of the day, worry about washing your beard. Do not look at the beard as facial hair, but as a skin appendage like hair. Although in structure and functionality, they are slightly different. It is important to pay the same attention to the beard as we do to our hair.
It is a good idea to wash your beard either with a specific shaving shampoo or even with a mild soap, which respects your skin’s pH.
Simple hand soap may not work as it can be too aggressive for the skin under your beard.
Among other things, since the beard is different from the hair as it is more likely to be caressed or touched with the hands, imagine how many germs it captures. Just think of the keyboard keys we type, the residues of pollutants and food, to have a nice bacterial mixture within reach of the beard. It must be washed!
The equation is soon done, not only for how to soften the beard but also for an aesthetic factor.
An uncared-for beard means a rough beard. A rough beard means a neglected appearance. A neglected appearance indicates a person who does not love himself. But you absolutely don’t want this!
How Often Should You wash Your Beard?
After washing off the excess sebum with a mild shaving shampoo, the second step on how to soften your beard is to comb it.
The correct way to comb the beard is to comb the hair all upwards as if it were the pharaoh Tutankhamun’s beard. Later you will understand what the use of combing the beard in this way is.
How to Make Beard Soft?
To be sure, beard oil should be applied just immediately after the moment you step out of the shower, as it is most effective on the skin.
You will only have to take a couple of drops, obviously depending on your length: 2-3 drops if short, 5-6 if it’s medium or long.
Place the oil on your hands, start rubbing it in your hands and then massage it into your beard. Remember to apply it evenly and not too abundantly.
Also, a good massage or friction on the beard allows the hair to absorb the beard oil nutrients that will serve to regulate your thick mane.